Plastic Bottle Manual Blow Moulding Machine , PET Bottle Plastic Processing Machinery
ZG-1000A PET Plastic Bottle Making Machineis suitable to produce 100ml-2L water buckets, drinking water bottles or baby bottles etc.
1. Produce bottle from 100ml to 2L(2 cavity)
2. Output capacity up to 1200bph for 500ml using two-cavity blowing mold (one blower & one heater)
3. Advanced PLC control system with a use-friendly panel and time-control precision of PLC up to
4. Equipped with special designed air storage unit
5. Using Infrared preform heater
6. Independent Temperature Control for different heating lamp to get ideal preform heating results
7. Heating lamps are adjustable in directions to suit various preforms.
8. Operated only by one person without special training.
9. Simple installation & start up adjustment.
10. Waste rate of finished bottle is less than 0.1%
11.Machine Mold customizing is available.
a). PLC: DELTA (Taiwan)
b). Cylinder: Airtac (Taiwan)/ FESTO (Germany) MOHE(Japan)
c). Valve: Airtac(Taiwan)/Parker(U.S.A.)
d). Relay: IEDC (Japan)
e). Photoelectric switch: AUTONICS (Korea)
f). All the components are selected with international advanced high-tech products.
ZG-1000A Technical Parameter
|Output||Based on bottle shape||800-1200PCS/H|
|Product Specifications||Diameter range||15mm-50mm|
| ||Container diameter||20mm-100mm|
| ||Container height||50mm-450mm|
|Mold Specifications||Cavity||2 cavity|
| ||Mold thickness||100mm~250mm|
| ||Mold effective area||480mm*340mm|
|Machine Power||Power Voltage||380v 3Phase /220v 3Phase 50/60HZ|
| ||Installed power /Actual power||16kw/10kw|
|Air Source||High pressure air compressor||1.2m³/min 30Kg|
| ||Air dryer||2.0m³/min 30Kg|
|Blowing machine size||Length*width*height/weight||1590*615*1570mm/650kg|
ZG-1000A Machine Main Part
|Electric Part||PLC control system||Delta|
| ||Human-computer interface||Delta|
| ||Blowing valve||Parker|
| ||Operating valve||AIRTAC|