PET Plastic Bottle Blower , Plastic Mineral Water Bottle Making Machine
Bottle Making Machine is suitable to produce 0.1L-2L water buckets, drinking water bottles or beverage bottles, etc.
1. Produce bottle from 100ml to 2L(2 cavity)
2. Output capacity up to 2300bph for 500ml using two-cavity blowing mold (one blow machine & one feeding machine)
3. Advanced PLC control system with a use-friendly panel and time-control precision of PLC up to
4. Equipped with special designed air storage unit
5. Using Infrared preform heater
6. Independent Temperature Control for different heating lamp to get ideal preform heating results
7. Heating lamps are adjustable in directions to suit various preforms.
8. Operated only by one person without special training.
9. Simple installation & start up adjustment.
10. Waste rate of finished bottle is less than 0.1%
11.Machine Mold customizing is available.
a). PLC: DELTA (Taiwan)
b). Cylinder: Airtac (Taiwan)/ FESTO (Germany) MOHE(Japan)
c). Valve: Airtac(Taiwan)/Parker(U.S.A.)
d). Relay: IEDC (Japan)
e). Photoelectric switch: AUTONICS (Korea)
f). All the components are selected with international advanced high-tech products.
ZG-2000 Technical Parameter
|Output||Based on bottle shape||1800~2300pcs/h based on different volume|
|Product Specifications||Diameter range||15mm-38mm|
|Mold Specifications||Cavity||2 cavities|
|Mold effective area||500mm*360mm|
|Machine Power||Power Voltage||380v 3Phase /220v 3Phase 50/60HZ|
|Installed power /Actual power||30kw/20kw|
|Air Source||High pressure air compressor||1.2m³/min 30Kg|
|Low pressure air compressor||1.6m³/min 12Kg|
|Air dryer||2.0 m³/ 30Kg|
|Blowing machine size||Length*width*height/weight||1980*1650*2020mm/2000kg|
|Preform loader size||Length*width*height/weight||1950*1350*2650 mm/550kg|
ZG-2000 Machine Main Part
|Electric Part||PLC control system||Delta|
| ||Human-computer interface||Delta|
| ||Blowing valve||Parker|
| ||Operating valve||AIRTAC|